Making and Receiving Calls on the
Motorola V.60c/V.120c
Please note: Although the instructions and keys displayed below
are for the Motorola V.60c, the same instructions apply to the Motorola
V.120c. Both phones have similar keys and functionality with the exception
of the "flip", which is only available on the V.60c. Therefore, any steps
pertaining to this feature can be omitted for the V.120c, however all other
steps can be applied.
Making and Ending a Call
Making a Call
Open the flip, dial the number you wish to call and press 
to place the call.
NOTE: To correct dialing mistakes, press 
under 'DELETE' to erase one digit at a time. You can also press and hold
under 'DELETE' to erase the entire number.
Ending a Call
To end a phone call, simply press  ,
or close the flip.
Using the Notepad
If you enter a number and choose not to place a call to it, the number
will be stored in the Notepad.
|
Step 1
|
From the standby mode, press  .
|
|
Step 2
|
Highlight 'Recent Calls' and press  under 'SELECT'.
|
|
Step 3
|
Highlight 'Notepad' and press under 'SELECT'.
|
|
Step 4
|
The info that you previously entered will
be displayed. Press 
to place the call or
under 'STORE' to save the number to your phone book.
|
|
Using the Dialing Menu
|
Step 1
|
Enter a number and press .
|
|
Step 2
|
Highlight one of the following and press
under 'SELECT' and follow the prompts.
- Attach Number - Allows you to attach a number from
the Phone Book or Recent Calls List to the end of the digits
you entered.
- Insert Pause, Wait, or 'n' - These are helpful
for accessing automated systems.
- Insert the Pause and then enter the second string
of digits you would like your phone to send automatically
(ie. your bank password).
- Insert the wait and enter the second string of digits
and your phone will prompt you before it sends them.
- Insert the 'n' and the phone will prompt you for a
number before it sends the next digit.
- Send Message - Create a text message to send to
the number entered.
|
|
top of page
Receiving a Call
To receive an incoming phone call, simply open the flip.
OR
If the flip is already open, press
to answer the call.
Multi Key Answer
This feature enables you to answer any incoming calls by pressing any
key (excluding ,
,
,
volume keys, or the Voice Key on the right side of the phone).
|
Step 1
|
From the standby mode, press .
|
|
Step 2
|
Highlight 'Settings' and press under 'SELECT'.
|
|
Step 3
|
Highlight 'In-Call Setup' and press under 'SELECT'.
|
|
Step 4
|
Highlight 'Answer Options' and press under 'SELECT'.
|
|
Step 5
|
Highlight 'Multi-key' and press under 'CHANGE'.
|
|
Step 6
|
Press  to
toggle between 'On' and 'Off' and press
under 'SELECT' to save your setting.
|
|
Open to Answer
You can set your phone to automatically answer as soon as you open the
flip.
|
Step 1
|
From the standby mode, press .
|
|
Step 2
|
Highlight 'Settings' and press under 'SELECT'.
|
|
Step 3
|
Highlight 'In-Call Setup' and press under 'SELECT'.
|
|
Step 4
|
Highlight 'Answer Options' and press under 'SELECT'.
|
|
Step 5
|
Highlight 'Open To Answer' and press under 'CHANGE'.
|
|
Step 6
|
Press the scroll key to toggle between
'On' and 'Off' and press under 'SELECT' to
save your setting.
|
|
Missed Call Notification
When an incoming call is not answered, you will be notified by a message
on your display and the call will automatically go into the 'Recent Calls'
list.
|
Step 1
|
From the standby mode, press .
|
|
Step 2
|
Highlight 'Recent Calls' and press under 'SELECT'.
|
|
Step 3
|
Highlight 'Received Calls' and press under 'SELECT'.
|
|
Step 4
|
Highlight the desired call and press under 'VIEW' to see the details of that call.
|
|
top of page
Redialing the Last Outgoing Number
To redial the last outgoing number dialed, simply press
twice.
Using Automatic Redial
Using this feature will set your phone to repeat the call attempt over
the next four minutes.
|
Step 1
|
From the standby mode, press .
|
|
Step 2
|
Highlight 'Settings' and press under 'SELECT'.
|
|
Step 3
|
Highlight 'Other Settings' and press under 'SELECT'.
|
|
Step 4
|
Highlight 'Initial Setup' and press under 'SELECT'.
|
|
Step 5
|
Highlight 'Auto Redial' and press under 'CHANGE'.
|
|
Step 6
|
Press
to toggle between 'On' and 'Off' and press
under 'SELECT' to save your setting.
|
|
top of page
Calling from the Call History
|
Step 1
|
From the standby mode, press .
|
|
Step 2
|
Highlight 'Recent Calls' and press under 'SELECT'.
|
|
Step 3
|
Highlight 'Received Calls', 'Dialed Calls',
or 'Notepad'.
|
|
Step 4
|
Highlight the desired entry and press
to place the call.
|
|
top of page
Dialing from the Phone Book
|
Step 1
|
From the standby mode, press
under 'PH. BOOK'.
|
|
Step 2
|
Highlight the desired entry and press
to place the call.
|
|
top of page
Speed Dialing
|
Step 1
|
From the standby mode, enter the one, two,
or three digit speed dial number, followed by  .
|
|
Step 2
|
Press to place the call.
|
|
top of page
One-Touch Dialing
One-Touch Dialing enables you to place a call with the press of one button.
You can place calls to phone book entries 2 through 9 with this feature.
To use this feature, simply press and hold the one-digit speed dial number
for one second.
top of page
Using Voice Dialing
Voice dialing enables you to make calls to entries stored in your phone
book by simply saying the person's name. You can store up to 20 different
entries with voice dial.
|
Step 1
|
From standby mode, press the Voice Key
on the right side of the phone.
|
|
Step 2
|
When prompted say the voice name into the
phone to display the entry and automatically place the call.
NOTE: If you say the name incorrectly,
you will be prompted to repeat it.
|
|
top of page
Dialing from a Text Message
If you receive a text message with a telephone number included in it,
you can easily call that number.
|
Step 1
|
From standby mode, press
under 'MESSAGE'.
|
|
Step 2
|
Highlight 'Text Msgs' and press under 'SELECT'.
|
|
Step 3
|
Highlight the desired message and press
under 'READ'.
|
|
Step 4
|
If the message contains a callback number,
simply press to place a call to that number.
|
|
top of page
Dialing Special Numbers
To connect to TELUS Client Care, simply dial 611 and press .
To obtain residential, business and government listings, contact Directory
Assistance by dialing 411 and pressing .
top of page
Making Emergency Calls
You can place calls to 911, TELUS Mobility Client Care (611), and one
other number that you specify, even if your phone is locked.
top of page
Caller ID
Caller ID lets you view the number of the caller when your phone rings.
If the number is already stored in your book, the name will also appear
with the number. Your number will also be displayed to anyone who has
this feature on their phone.
Blocking your Number from Being
Displayed
|
Step 1
|
Press  ,
 ,
and enter the number you wish to call.
|
|
Step 2
|
Press to place the call. Your number
will not be displayed if the receiving party has caller ID
on their phone.
NOTE: To permanently block your
number, please call TELUS Client Care.
|
|
top of page
Call Waiting
Call Waiting allows you to receive a second call during a conversation.
|
Step 1
|
While in a call, press to receive
another incoming call.
|
|
Step 2
|
Press again to toggle between the
two parties.
NOTE: To temporarily disable this
service, press ,
,
before placing a call. It will be turned back on once you
hang up..
|
|
top of page
Three Way Calling
*This service is an optional add on to your account. Please contact TELUS
Mobility Client Care at 1-877-253-2763 if you would like this service.
|
Step 1
|
Dial the first number you wish to call
and press .
|
|
Step 2
|
Wait for the call to be connected and press
the key to place the call on hold.
|
|
Step 3
|
Enter the second number and press
to place the second call.
|
|
Step 4
|
Once the second party answers, press
to begin the three way call.
|
|
top of page
|
